1 (edited by Debbie Johnson 2013-02-10 18:49:20)

Topic: Help in Rocky Mountainside

Not sure if i'm asking in the right place? I need help with the laser light set up in Rocky Mountainside to activate the laser. I've tried to search to see if anyone else had any problems or suggestions and couldn't not find any. Thank you for the help! Deb Johnson

Re: Help in Rocky Mountainside

No this is not the right place, should have been placed in Diggy's Adventure Player Discussion, but I'll answer it here.

You need to move the mirrors around so that the light beams from the white light-sources pass through the three colored stones, and into the respective receivers. When that's done, the way into the room with the activation lever will open, an you can go in and activate it.

Re: Help in Rocky Mountainside

Debbie,

as Martin already advise you try to look at this picture http://i.imgur.com/0D17FJ3.png and try to get the laser light through the coloured places to the corresponded receiver; it means the red light will go to the red receiver etc. Let me know how is it going wink

Diggy's Adventure Community Manager

Re: Help in Rocky Mountainside

I need help or a picture on how to activate lasers TYVM

Re: Help in Rocky Mountainside

http://i.imgur.com/J21RHbo.jpg

Re: Help in Rocky Mountainside

Thank You So Very Much!!

Re: Help in Rocky Mountainside

You're welcome! smile

Re: Help in Rocky Mountainside

Hi, I have 191/247 tiles... I see the arrow, but can't understand how to get to the missing tiles. tnx for help! :-)

Re: Help in Rocky Mountainside

Jordan Baker wrote:

Hi, I have 191/247 tiles... I see the arrow, but can't understand how to get to the missing tiles. tnx for help! :-)

After "blasting" through the first mountain situate the "new" mirror in the second room so the laser will hit that arrow. Go back and turn the laser on again.

Re: Help in Rocky Mountainside

Jordan, were you able to finish it after Anne´s advice smile?

Diggy's Adventure Community Manager

Re: Help in Rocky Mountainside

Help please.i have activated the laser for the first and second row of rocks.i am now stuck at the 3rd row.looks like i need another mirror

Re: Help in Rocky Mountainside

I HAVE ALL MY MIRRORS IN PLACE BUT MY LASER WONT LIGHT UP AND I CANT COMPLETE THE ROCKS WITH THE ARROW PLEASE HELP

Re: Help in Rocky Mountainside

Victoria Coviello wrote:

I HAVE ALL MY MIRRORS IN PLACE BUT MY LASER WONT LIGHT UP AND I CANT COMPLETE THE ROCKS WITH THE ARROW PLEASE HELP

Hi Victoria, try pulling this lever. If I remember correctly, it activates the laser. smile http://prntscr.com/36vojw

Diggy's Adventure Community Manager

Play our games on Pixel Portal and get 10% more Gems compared to Facebook!
http://portal.pixelfederation.com

Re: Help in Rocky Mountainside

I'm having a problem here too, I completed the quest and went back to finish this but when I pull the lever to activate the laser to break the rocks the door closes and I am locked in the control room. The sign says the door will be locked while the laser is active. Is there a way to activate the laser without getting locked in the room?

Re: Help in Rocky Mountainside

Juanita Roberts wrote:

I'm having a problem here too, I completed the quest and went back to finish this but when I pull the lever to activate the laser to break the rocks the door closes and I am locked in the control room. The sign says the door will be locked while the laser is active. Is there a way to activate the laser without getting locked in the room?

You don't need to be out with active laser. Do you want to get burned :-)
Position the mirrors, pull the lever to break some walls, pull it again after the job is done.